Page count: 23
Number of steps: 30
By attaching faceted briolettes to a hammered heart frame, you can create sophisticated, eye catching jewellery, especially when paired with a pair of ‘Embellished Artisan earwires’.
The finished look of this design is greatly affected by your choice of shape and size of stone. Smaller briolettes give a subtle effect or larger ones can create a bold look!
Jewellery findings can be as ornately decorated as the jewellery they are attached to, so that they enhance the finished item. These embellished Artisan earwires can be coordinated to match your earrings, or left as plain wire, without the beads!
These earrings measure 2 1/4” tall from the top of the earwire to the bottom of the second briolette.
1. Hammering, filing and sanding
2. Embellishing with wire and beads
3. Shaping frame wires
4. Binding with thin wire
5. Forming a round loop
6. Attaching briolette beads to the frame
7. Weaving around frame and briolettes to secure in position
This tutorial is packed with tips, trouble shooting tricks and even has notes on a variation at the end. With over 60 close up colour photos, there is no room left for guesswork, as I walk you through the techniques required to make this beautiful piece of jewellery.
As with any written instruction, please read through at least once before starting.
• 40” 28 gauge soft or half hard round wire
• 8” 18 gauge soft round wire
• 7” 20 gauge soft or half hard round wire
• 10 x 2 or 3mm roundel beads
• 2 x Teardrop Briolettes 6 x 3mm
• 2 x Teardrop Briolettes 6 x 4mm in contrasting colour
• 24” 28 gauge soft round wire
• Round nose pliers
• Flat nose pliers
• Chain nose pliers
• Flat nylon jaw pliers
• Flush wire cutters
• Flat file
• Sanding pads (optional)
• Tape measure
• Marker pen
• Chasing hammer
• Anvil or bench block
About the artist
Abby Hook Jewellery Artistsee "Embellished Heart Earrings, Wire Jewelry Tutorial" on Abby Hook's website
Info for buyers
- accepts paypal
- accepts cheques
- international delivery
- 14 day cancellation period
- delivery usually 5 days